How is maximum outrigger force calculated?

For symmetrical 4-outrigger setup: max outrigger F = W_total/4 + (W_load·r + W_crane·e)/(L/2) where r = load radius, L = outrigger span, e = swing eccentricity. Actual distribution depends on crane position and geometry.

What pad size is needed for a 500 kN outrigger force?

Allowable soil bearing 100 kPa: A_required = 500/100 = 5 m². Use 2.25×2.25m mat or equivalent. For structural concrete: check mat bending. Steel plates spread load to larger wood mat to further distribute.

What is the safety factor for crane outrigger loading?

ASCE 37-14: crane loads are variable loads. Apply load factor 1.4-1.6 for outrigger design. Soil bearing check: F_design/A_pad ≤ q_allow/1.5. ASME B30.5 crane safety standard governs operational procedure.

Crane Outrigger Force Calculator

Calculate maximum outrigger force for mobile crane operations: F = (W_crane·a + W_load·r)/b. Outrigger pad bearing pressure on soil and mat. Required pad area for allowable ground bearing pressure. Crane stability check.

2D stress state at a point. All stresses in MPa.

σx — Normal Stress X (MPa)

σy — Normal Stress Y (MPa)

τxy — Shear Stress (MPa)

⚙ Mechanical Note: Results are based on standard textbook formulas and ISO/AASHTO references. Always verify critical designs with applicable codes (ISO 898, AASHTO 1993, AISC, Eurocode 3) and a qualified engineer.

How to Use

Enter the values for the patient or scenario you are assessing. Calculate maximum outrigger force for mobile crane operations: F = (W_crane·a + W_load·r)/b. Outrigger pad bearing pressure on soil and mat. Required pad area for allowable ground bearing pressure. Crane stability check. Use the crane outrigger result to inform your clinical assessment.

Related Calculators

Crane Load

Engineering

Footing Bearing

Engineering

Soil Bearing Capacity

Engineering

Crane Outrigger Force Calculator

How to Use

Related Calculators

Frequently Asked Questions

How is maximum outrigger force calculated?

What pad size is needed for a 500 kN outrigger force?

What is the safety factor for crane outrigger loading?