Exhaust Gas Temperature Calculator

Calculate exhaust gas temperature from fuel type, excess air, and inlet air temperature. Dew point of flue gas for condensation risk. Stack temperature limits for draft and acid corrosion prevention in boilers.

2D stress state at a point. All stresses in MPa.

σx — Normal Stress X (MPa)
σy — Normal Stress Y (MPa)
τxy — Shear Stress (MPa)
⚙ Mechanical Note: Results are based on standard textbook formulas and ISO/AASHTO references. Always verify critical designs with applicable codes (ISO 898, AASHTO 1993, AISC, Eurocode 3) and a qualified engineer.
Advertisement

How It Works

Calculate exhaust gas temperature from fuel type, excess air, and inlet air temperature. Dew point of flue gas for condensation risk. Stack temperature limits for draft and acid corrosion prevention in boilers

Each component has a specific meaning:

  • Fuel type — The fuel type recorded for the patient or scenario being assessed.
  • Excess air — The excess air recorded for the patient or scenario being assessed.
  • Inlet air temperature — The inlet air temperature recorded for the patient or scenario being assessed.

Note: Interpret the exhaust gas temp result against the clinical thresholds and context described above.

How to Use

Enter the fuel type, excess air, inlet air temperature for the patient or scenario you are assessing. Calculate exhaust gas temperature from fuel type, excess air, and inlet air temperature. Dew point of flue gas for condensation risk. Stack temperature limits for draft and acid corrosion prevention in boilers. Use the exhaust gas temp result to inform your clinical assessment.

Related Calculators

Combustion Efficiency

Engineering

Air-Fuel Ratio

Engineering

Adiabatic Flame Temperature

Engineering Ultra-depth

Frequently Asked Questions